Pitch Control: | Coarse - ±15%
Fine - ±0.7% |
Tape Drive System: | Capstan motor - FG (frequency generator), DC, direct drive motor x 1
Reel motors - Slot less DC motor x 2 |
Heads Configuration: | 3 heads; erase, record and reproduce x 2 |
Tape Cue: | Manual and automatic (RTZ and STC) |
Motion Sensing: | 0.5 sec. ±0.15 sec. delay time stop to next motion; tension servo system |
Frequency Response: | Recording / Reproduce - 40Hz to 20kHz, ±3dB at 0 VU / 40Hz to 20kHz, ±3dB at -10 VU
Sync and Reproduce - 40Hz to 20kHz, ±3dB |
Total Harmonic Distortion: | 0.8% at 0 VU, 1kHz, 250 nWb / m
3% at 12dB above 0 VU, 1kHz, 1000 nWb / m |
S / N Ratio: | At a reference of 1kHz, at 12dB above 0 VU, 1000 nWb / m
69dB A weighted (NAB)
62dB Unweighted
107dB A weighted (NAB), with dbx
100dB Unweighted, with dbx |
Adjacent Channel Crosstalk (Overall): | Better than 50dB down at 1kHz, 0 VU |
Erasure: | Better than 70dB at 1kHz, +10 VU reference |
Wow and Flutter: | ±0.08% peak (DIN / IEC / ANSI, weighted)
±0.12% peak (DIN / IEC / ANSI, unweighted)
0.04% RMS (JIS / NAB, weighted)
0.07% RMS (JIS / NAB, unweighted) |
Fast Wind Time: | 120 sec. for 10.5” reel, 2400 feet |
Spooling Wind Time: | 370 sec. for 10.5” reel, 2400 feet |
Start Time: | Less than 0.8 sec. to reach standard Wow and Flutter |
Line Input: | Input Impedance - 50kΩ, unbalanced
Maximum Source Impedance - 2.5kΩ
Nominal Input Level - -10 dBV (0.3V)
Maximum Input Level - +19 dBV (8.9V) |
Line Output: | Output Impedance - 500Ω, unbalanced
Min. Load Impedance - 10kΩ, unbalanced
Nominal Load Impedance - 50kΩ, unbalanced
Nominal Output Level - -10 dBV (0.3V)
Maximum Output Level - +19 dBV (8.9V) |
Bias Frequency: | 150kHz |
Record Level Calibration: 0 VU reference; | 250 nWb / m tape flux level |
Mounting: | Standard 19” rack with optional RM-500 |
Remote Control: | Full/Basic functions available with optional RC-51 / RC-50 |