MITSUBISHI DA-P20

Technic details

Specifications

Type:	Dual Monaural Construction Stereo Pre Amplifier
Input Sensitivity / Impedance:	Phono MC - 0.1mV / 10kΩ / 100pf Phono MM - 2.3mV / 50kΩ Tuner, AUX, Play 1, 2 - 150mV / 50kΩ
Output Level / Impedance:	Output - IV (Rated output) / 600Ω / 18V (Maximum output) REC 1, REC 2 - 150mV / 50kΩ Phones - 600mV (At output IV) / 15Ω 650mV (Maximum output) (Impedance from 8Ω to 16Ω)

Equivalent Input Noise Level (IHF, A network):	Phono MC - -157dB (V) (47Ω terminated) Phono MM - -136dB (V) (Closed circuit) Tuner, AUX, Play 1, 2 - -126dB (V) (Closed circuit)
S / N Ratio (IHF, A network, at rated output):	Phono MC - 72dB (47kΩ terminated) Phono MM - 73dB (2.2kΩ terminated) Tuner, AUX, Play 1, 2 - 106dB (Closed circuit) / 92dB (47kΩ / 250pF terminated)
Total Harmonic Distortion (At rated output attenuator - 20dB from 20Hz to 20kHz):	Phono MC - 0.005% Phono MM - 0.003% Tuner, AUX, Play 1, 2 - 0.002%
Channel Separation:	Phono MC, MM - Crosstalk is less than noise level at 1kHz 80dB at 20kHz Tuner, Play 1, 2 - Crosstalk is less than noise level at 1kHz 100dB at 20kHz
Frequency Response:	Phono MC, MM-20Hz to 20kHz, ±0.2dB (RIAA STD) Tuner, Play 1, 2-10Hz to 100kHz, +0 -0.5dB
[Tone Control]
Bass:	±10dB at 100Hz
Treble:	±10dB at 10kHz
Subsonic Filter:	18Hz (-6 dB / oct.)
Phono Overload Level (At 1kHz with 0.1% THD):	Phono MC - 12mV Phono MM - 290mV
Power Supply:	AC 100V, 50 / 60Hz
Power Consumption:	20W