LUXMAN 5C50

Technic details

Specifications

Type:	Control Amplifier
Output voltage / Impedance:	Pre out - 1V (Standard), 18V (Maximum) / 500Ω Rec out - 150mV (Standard), 18V (Maximum) / 500Ω
Total harmonic distortion:	Phono 1 / 2 - 0.005% or less (Rec out, 2V, 20Hz to 20kHz) Tuner, AUX - 0.005% or less (Pre out, 2V, 20Hz to 20kHz) Monitor 1 / 2 - 0.005% or less (Pre out, 2V, 20Hz to 20kHz)

Cross modulation distortion (60Hz: 7kHz = 4: 1):	Phono 1 / 2 - 0.002% or less (Rec out, 2V) Tuner, AUX - 0.002% or less (Pre out, 2V) Monitor 1 / 2 - 0.002% or less (Pre out, 2V)
Frequency response:	Phono 1 / 2 - 20Hz to 20kHz, ±0.2dB Tuner, AUX - 1Hz to 200kHz, -0.5dB Monitor 1 / 2 - 1Hz to 200kHz, -0.5dB
Input sensitivity / Impedance (Pre out, 1V):	Phono 1 / 2 - 2.5mV / 30kΩ to 50kΩ to 100kΩ (Continuous variable) Tuner, AUX - 150mV / 50kΩ Monitor 1 / 2 - 150mV / 60kΩ
S / N ratio (IHF-A curve correction, input short):	Phono 1 / 2 - 80dB or more Tuner, AUX - 100dB or more Monitor 1 / 2 - 100dB or more
Phono overload voltage:	Phono 1 / 2 - 300mV or more (1kHz, RMS)
[Crosstalk]
Phono1 / 2:	80dB or less (1kHz)
Tuner, Aux:	95dB or less (1kHz) 76dB or less (10kHz)
[Subsonic filter]
Frequency:	4Hz, 7Hz
Dip control:	Sharp to broad continuously variable
High cut filter:	12Hz / 18Hz, -12dB / oct.
Attached equipment:	Linear equalizer (Uptilt-2 / 1, flat, downtilt1 / 2) Phono input impedance adjustment Tape monitor circuit (2 lines) Tape dubbing circuit Attenuator MC input transformer socket
Power requirements:	AC 100V, 50 / 60Hz
Power consumption:	15W