Skip to main content
ensqarhyazbebgcazh-CNzh-TWhrcsdanlettlfifrkadeelhihuisidgaitjakolvltmkmsmtnofaplptrorusrskslessvthtruk

Crown IC-150

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco

Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet.
Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet.
Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet.

Technic details

Specifications

Type:
Integrated Circuit Stereo Console
Frequency Response:
3Hz to 100kHz, ±0.6dB (Hi-level, with hi-impedance load)
10Hz to 20kHz, ±0.1dB (With IHF load)
±0.5dB of RIAA, calibrated (Phono)
Phase Response:
Typically +1˚ to -12 ˚, 20Hz to 20kHz (Hi-level, with IHF load)
Typically ±5˚, 20Hz to 20kHz additional phase shift (Phono)
Hum and Noise:
90dB below rated output (Hi-level, 20Hz to 20kHz inputs shorted)
Typically 100dB (With IHF “A” weighted measurement)
80dB below 10mV input (Typically 0.5µV input noise)
I.M. Distortion:
Less than 0.01% at rated output with IHF measurement (Typically under 0.002%)
Inputs:
5 hi-level inputs (1 tuner, 2 auxiliary, 2 tape)
2 equalized phonos
Input Gain / Impedance:
20.8dB, ±0.2dB (Hi-level, 100kΩ)
50-70dB (Phono, Adjustable, 47kΩ, Sensitivity: 1mV @ 1kHz for rated output)
Phono Input Overload:
33-330mV at 1kHz, depending on gain (100mV when set to 60dB total preamp gain)
Output:
10V maximum before overload, 2.5 rated, 600Ω output impedance
Phono Output & Impedance:
600Ω with typical maximum output of 9V RMS at 1kHz into hi-impedance load (At tape out)
Volume Control:
Over 60dB
Tone Control:
Continuously variable ±15dB at 30Hz and 15kHz
Filters:
3dB at 50Hz with 6 dB / oct. cut-off, Stratch
3dB at 5kHz with 12 dB / oct. cut-off
AC Outlets:
Switched with 25A switch x 4 lines
Unswitched x 1 line
Semiconductors Used:
IC’s x 2
Transistors x 54
FET’s x 3
Diodes x 7
Zener Diodes x 3
Power Requirements:
AC 120 or 240V, 50-400Hz
Power consumption:
About 2W
Dimensions (W x H x D):
432 x 133 x 206mm
Weight:
4.54kg
6.8kg (With walnut cabinet)
Year:
1971

Buy this model

You can make a purchase request for this model. Our funds often hold several copies of each model. We are ready to consider any request and offer you our price.

Send request

SEND REQUEST