Skip to main content

FOSTEX 4035

Technic details

Specifications

Type:
Synchronizer Controller
Synchronization:
Accuracy - ±50µs
Resolution - 2µs
Typical lock-up time:
5 sec. from STOP
Lock-up rate:
½ ~ 2 times of PLAY speed

[Input]
Time code signal:
SMPTE - 30 F.P.S., SMPTE DROP FRAME
EBU - 25 F.P.S. and FILM 24 F.P.S.
Level: 100mV p-p ~ 10V p-p
Read speed range: ½ ~ 2 times
Input impedance: 10kΩ
[Video signal (Master only)]
Type: PAL or NTSC, negative sync composite video or sync
Level:
0.5 ~ 2V p-p composite video signal
0.2 ~ 8V p-p composite sync signal
Reference (Master only): 48 ~ 60Hz
Level: 0.2 ~ 8V p-p
Machine status:
Play, Stop, F. FWD, RWD, Rec
Tape speed pulses (TACH):
Higher than 4Hz at Play
Less than 5kHz at maximum speed
High level:
+3.5 ~ +15V
Low level:
Less than +0.8V
Direction sense:
High level - +3.5 ~ +15V
Low level - Less than +0.8V
[Output]
Machine controls: Play, Stop, F. FWD, RWD, Rec
Level:
High level, open collector, less than 30V
Low level, 0.4V, less than 20mA
[Servo (Slave only)]
External pull-up voltage: +24V max.
Voltage output: +18V ~ -14V
Output impedance: 1kΩ
Frequency output: 2kHz ~ 30kHz
Output level:
High - 4V
Low - 0.4V
Output impedance: 22Ω nominal
Communication buss:
Quasi-RS232C, DIN 8 pin connector
Controller I/O:
30 pin flat cable connector

Power supply:
AC 85 ~ 132, 50 / 60Hz
AC 170 ~ 264V, 50 / 60Hz
Power consumption:
12W
Dimensions (W x H x D):
482 x 44 x 255mm
Weight:
3.5kg (Net)
3.9kg (Shipping)

Buy this model

You can make a purchase request for this model. Our funds often hold several copies of each model. We are ready to consider any request and offer you our price.

Send request