Skip to main content

YAMAHA F1030

Technic details

Specifications

Type:	Professional Frequency Dividing Network
Controls and Switches:	POWER ON / OFF switch, MODE SELECTOR, 26-Position Log-Linear Detended and dB-calibrated INPUT and OUTPUT Attenuators, Crossover Frequency Selectors, N / R output phase switches, Slope internal switches, 40Hz High Pass internal switch, Input connector selector switch (XLR Connectors / Phone jacks)

Frequency response:	Each output is -3dB at the chosen crossover frequency (Relative to its mid-band level) All outputs are essentially flat within their respective pass bands At the Phone jack inputs and outputs, the LOW output is ±0.5dB to 20Hz with the 40Hz High Pass filter switched out The High output is ±0.5dB to 20kHz At the XLR inputs and outputs, the LOW output is ±0.5dB to 20Hz with the 40Hz High Pass filter switched out The High output is ±0.5, -1.5dB to 20kHz
Total Harmonic Distortion:	Less than 0.05% at +24B (12.3V) output (30Hz to 20kHz)
Hum and Noise:	-76dB (80dB S / N ratio) with Input level control at “-6”, output level controls at maximum, inputs and outputs terminated by 600Ω
Maximum Voltage Gain:	+6dB
[Inputs]	Connectors: XLR-3-31, XLR-3-32, Phone jack Actual / Nominal Impedance: 10kΩ / 600Ω Sensitivity: -2dB (616mV) Nominal / Maximum Level: +4dB (1.23V) / +30dB (24.5V, Input attenuator at the “6” position)
[Outputs (High, Middle, Low)]	Connectors: XLR-3-32, Phone jack Actual / Nominal Impedance: 200Ω (XLR-3-32), 5Ω (Phone) / 600Ω (XLR-3-32), 600Ω (Phone) Nominal / Maximum Level: +4dB (1.23V) / +24dB (12.3V)
[Filters]	Filter / Mode: 40Hz High Pass / Switchable in any mode -3dB Frequencies: 40Hz Slope: 12 dB / oct.
[Left-Hand Set of Crossover Frequency Controls]	Filters / Mode: Low Pass, High Pass / 2WAY-1, 3-WAY -3dB Frequencies: 250Hz / 500Hz / 800Hz / 1kHz / 1.2kHz / 1.5kHz Slope: 12 or 18 dB / oct.
[Right-Hand Set of Crossover Frequency Controls]	Filters / Mode: Low Pass, High Pass / 2WAY-2, 3-WAY -3dB Frequencies: 2kHz / 2.5kHz / 5kHz / 6kHz / 7kHz / 8kHz Slope: 12 or 18 dB / oct.
Indicators:	3 PEAK LED (Light Emitting Diode) indicators above LOW, MIDDLE, and HIGH controls turn on when output level reaches +14dB (3.88V)
Finish:	Semi-Gloss Black

Power Requirements:	AC 110 / 117 / 130 / 220 / 240V, 50 / 60Hz
Power Consumption:	10W
Dimensions (W x H x D):	480 x 95.5 x 238.7mm
Weight:	7.5kg (Net)

Buy this model

You can make a purchase request for this model. Our funds often hold several copies of each model. We are ready to consider any request and offer you our price.