SANSUI APS-2600

Input sensitivity (At the time of an Output power):
Phono - 2mV ±3dB
AUX - 100mV ±3dB
Tape Monitor - 120mV ±3dB
Recording output: 30mV ±3dB
Equalizer characteristics (Phono): RIAA
Damping factor: 20 or more

Bass: ±8dB (100Hz)
Treble: ±8dB (10kHz)
Loudness control (Volume -30dB):
+6dB (100Hz)
+3dB (10kHz)
Noise filter: -10dB (10kHz)

Receive frequency range: 76MHz to 90MHz
Receive sensitivity: 2.5μV ±3dB (S / N ratio 20dB)
Total harmonic distortion: 1% or less
S / N ratio: 50dB or more
MPX stereo separation: 30dB or more

Reception frequency range: 535kHz to 1605kHz
Reception sensitivity: 25μV ±3dB (S / N ratio 20dB, 1MHz)

Drive system: Belt drive system
Turntable: 31cm aluminum alloy die-cast
Weight: 1.3kg
Drive motor: Condenser activated 4-pole hysteresis synchronous motor
Rated speed: 33-1/3 rpm, 45 rpm
Rotation switching system: Push button type belt switching mechanism
S / N ratio: 45dB or more
Wow and flutter: 0.09% or less
Tonearm: Static balance type pipe arm
Inside force canceller equipment
Tracking error ± 1˚ or less
Needle pressure: 0 - 2.5g (Direct reading in 0.5g steps)
Cartridge: IM type
Frequency characteristics: 20Hz to 20kHz
Output balance: Within 1.5dB
Load resistance: 50kΩ
Channel separation: 20dB or more (1kHz)
Output voltage: 5mV
Needle pressure: 1.5 - 2g
Needle compliance: 17x10-6 cm / dyne
Needle: 0.5mil diamond needle

Type: 3 way, 3 speaker, bass-reflex system, floor type
Used units:
For low-pass - 30cm cone type
For mid ranges - 12.5cm cone type
For high regions - 5cm horn type
Frequency characteristics: 30Hz to 20kHz
Impedance: 8Ω
Crossover frequency: 1.5kHz, 5kHz

Amplifier / Tuner: Tape monitor
DIN standard 5P recording / playback connector
Stereo headphone jack
Noise filter
Acoustic selector
FM stereo automatic switching circuit
FM stereo indicator
FM simple antenna
AM ferrite bar antenna
Signal strength indicator meter
Extra speaker terminal (4 to 16Ω)
Tuner color coding (FM green, AM red)
Lighting guidelines
Record player: Power switch-linked slow-moving arm lifter
Needle pressure direct reading weight
European standard head shell

AC 100V, 50 / 60Hz

130W