SANSUI APS-1200M

Tape Monitor - 120mV, ±3dB
Recording output - 30mV, ±3dB
Equalizer characteristics (Phono) - RIAA
Damping factor - 20 or more
Power supply voltage - AC 100V, 50 / 60Hz
Power consumption - 66VA (At maximum input signal)

Bass - ±8dB (100Hz)
Treble - ±8dB (10kHz)
Loudness control (Volume -30dB) - +6dB (100Hz) / +3dB (10kHz)

Receive frequency range - 76MHz to 90MHz
Receive sensitivity - 2.5μV, ±3dB (S / N ratio 20dB)
Total harmonic distortion - 1% or less
S / N ratio - 50dB or more
MPX stereo separation - 30dB or more

Reception frequency range - 535kHz to 1605kHz
Reception sensitivity - 25μV, ±3dB (S / N ratio 20dB, 1MHz)

Drive system - Belt drive system
Turntable - 30cm aluminum alloy die-cast, 1.1kg
Drive motor- Condenser activated 4-pole hysteresis synchronous motor
Power supply - 100V, 50 / 60Hz
Rated speed - 33-1 / 3 rpm, 45 rpm
Rotation switching system - Push button type belt switching mechanism
S / N ratio - 45dB or more
Wow and flutter - 0.09% or less
Tonearm - Static balance type pipe arm
Tracking error - ±1or less
Needle pressure - 0 to 2.5g (Direct reading in 0.5g steps)
Cartridge - IM type
Frequency characteristics - 20Hz to 20kHz
Output balance - Within 1.5dB
Load resistance - 50kΩ
Channel separation- 20dB or more (1kHz)
Output voltage - 5mV
Needle pressure - 1.5g to 2g
Needle compliance - 17 x 10-6cm / dyne
Needle - 0.5mil diamond needle

Type - 3 way, 3 speaker, bass-reflex, floor type
Used units - For low-pass - 25cm cone type / For mid ranges - 12.5cm cone type / For high regions - 5cm horn type
Frequency characteristics - 30Hz to 20kHz
Impedance - 8Ω
Crossover frequency - 1.5kHz, 5kHz

Amplifier / Tuner - Tape monitor DIN standard - 5P recording / playback connector
Stereo headphone jack
Noise filter
Acoustic selector
FM stereo automatic switching circuit
FM stereo indicator
FM simple antenna
AM ferrite bar antenna
Signal strength indicator meter
Extra speaker terminal (4 to 16Ω)
Tuner color-coding (FM green, AM red)
Lighting guidelines
Record player - Power switch-linked slow-moving arm lifter
Needle pressure direct reading weight
European standard head shell