Power Bandwidth: | 10Hz to 100kHz (Stereo, 215W, 8Ω, 0.1% THD)
10Hz to 100kHz (Stereo, 350W, 4Ω, 0.1% THD)
10Hz to 100kHz (Mono, 700W, 8Ω, 0.1% THD) |
Total Harmonic Distortion (20Hz to 20kHz): | Less than 0.005% (Stereo, 215W, 8Ω)
Less than 0.01% (Stereo, 350W, 4Ω)
Less than 0.01% (Mono, 700W, 8Ω) |
Intermodulation Distortion (60Hz: 7kHz = 4: 1): | Less than 0.005% (Stereo, 215W, 8Ω)
Less than 0.01% (Stereo, 350W, 4Ω)
Less than 0.01% (Mono, 700W, 8Ω) |
Channel Separation (Input ATT max., input 600Ω Shunt): | More than 80dB (215W, 20Hz to 20kHz, 8Ω) |
Damping Factor: | More than 300 (1kHz, 8Ω) |
S / N Ratio: | More than 110dB (Input 600Ω Shunt, IHF-A) |
Residual Noise: | Less than 75dB (ATT at min., 12.7kHz, -6 dB / oct. LPF)
Less than 80dB (ATT at min., IHF-A) |
Slew Rate: | ±60 V / µs, Full Swing (Stereo, 8Ω)
±100 V / µs, Full Swing (Mono, 8Ω) |
Sensitivity: | +4dB (1.23V) (ATT max., 400W, 8Ω, 1kHz) |
Input Impedance: | More than 15kΩ (Balanced / Unbalanced) |
Maximum Voltage Gain: | 33.3dB (Input ATT max., 1kHz) |
Meters: | -50dB to +7dB (Large illuminated)
0dB = 160W, 8Ω (Peak level meters x 2) |
[Indicators] | Illuminate when output distortion from channel exceeds approx. 1%: Red clip LED x 2
Illuminates when BTL (Mono) mode is selected: Green BTL LED x 1
Illuminates during high-speed fan operation: Red thermal fan LED x 1
Illuminates during protection or muting circuit operation: Red protection LED x 1
Illuminates when Power On: Red power LED x 1 |
[Protection Circuit] | Muting: 6 (±2 sec.) after Power On
DC sensing: DC ±2V output voltage
PC limiter: RL ≤2Ω
Thermal: ≥100˚C Heat Sink Temp |
Supplied Accessories: | Knob Lock x 2
3mm, Allen Key x 1 |
