Power Bandwidth: | 10Hz to 100kHz (Stereo, 8Ω, 120W, T.H.D. 0.1%)
10Hz to 100kHz (Mono, 16Ω, 240W, T.H.D. 0.1%) |
[Total Harmonic Distortion] | |
Stereo, 8Ω, 120W / Mono, 16Ω, 240W: | Less than 0.003% (1kHz)
Less than 0.007% (20Hz to 20kHz) |
Mono, 8Ω, 350W: | Less than 0.01% (20Hz to 20kHz) |
I.M. Distortion (70Hz: 7kHz mixed 4: 1): | Less than 0.01% (Stereo, 8Ω, 120W)
Less than 0.01% (Mono, 16Ω, 240W) |
Input Sensitivity: | 0dB / 0.775V rms (100W output into 8Ω) |
Input Impedance: | 25kΩ (Balanced and unbalanced inputs, maximum attenuator setting) |
Damping Factor: | Greater than 350 (8Ω, 1kHz)
Greater than 200 (8Ω, 20Hz to 20kHz) |
S / N Ratio: | 110dB (Input shorted at @12.47kHz)
115dB (Input shorted at @IHF-A) |
Slew Rate: | 60V / µsec. (Stereo, 8Ω)
90V / µsec. (Mono, 16Ω) |
Channel Separation: | 95dB (8Ω, 120W, 1kHz)
80dB (8Ω, 120W, 20Hz to 20kHz) |
Relay Muting Time: | 4, +2 -1 sec. |
Indicators: | Power On - LED
Protection (Relay OFF) - LED
Thermal Overload (85 ±5°C) - LED
Clipping (2% T.H.D.) - LED |
Front Panel Controls: | Power Switch - Push On / Push Off
Input Attenuators (One per channel) - 22defent positions in -1dB steps (0, -1, -2 … -20, ∞) |
Rear Panel Controls / Connectors: | Mode switch - Stereo / Mono
Pin 1 GND Switch (XLR connectors) - On / Off
Balanced / Unbalanced Switch - Balanced (XLR) / Unbalanced (Phone) |
