Cross modulation distortion: | Tuner, AUX, tape → sp terminal: 0.003% (At the time of a rated output, 8Ω, 60Hz: 7kHz = 4: 1) |
[Frequency characteristics] | Tuner, AUX, tape → sp terminal (straight DC On): DC to 450kHz, -3dB
Tuner, AUX, tape → sp terminal (Straight DC Off): 18Hz to 450kHz, -3dB |
[Output bandwidth (IHF)] | Tuner, AUX, tape → sp terminal: 5Hz to 70kHz (When distortion rate is 0.03%, 8Ω) |
Damping factor: | 100 or more (Tuner, AUX, tape → sp terminal, DC to 20kHz, 8Ω) |
[Input sensitivity / impedance] | Phono1 (MM) → sp terminal: 2.5mV / 50kΩ
Phono2 (MC) → sp terminal: 0.1mV / 100Ω
Tuner, AUX, tape → sp terminal: 200mV / 50kΩ |
[Phono maximum allowable input (1kHz, distortion rate 0.015%)] | Phono1 (MM) → rec out: 230mV
Phono2 (MC) → rec out: 9mV
Phono RIAA deviation: 20Hz to 20kHz, ±0.2dB |
[S / N ratio (IHF-A)] | Phono1 (MM) → sp terminal: 90dB
Phono2 (MC) → sp terminal: 70dB
Tuner, AUX, tape → sp terminal: 105dB |
Output level / impedance tape rec pin: | 200mV / 330Ω |
[Tone control (Tuner, AUX, tape → sp terminals)] | Bass: ±7.5dB (100Hz)
Treble: ±7.5dB (10kHz)
Loudness control: +9dB (100Hz, tuner, AUX, tape → sp terminal, Volume -30dB) |
Transient response rise time: | 0.8μs (Tuner, AUX, tape → sp terminal) |
Slew rate: | ±150V / μs (Tuner, AUX, tape → sp terminal) |
[Power AC outlets] | Power switch interlocking: 2 lines (100W)
Power switch non-interlocking: 1 line (400W) |