Skip to main content

TOA Model P-300M

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco

Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet.
Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet.
Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet. Item Lorem ipsum dolor sit amet.

Technic details

Specifications

Type:
Professional Stereo Power Amplifier
Power Output (Stereo):
300W minimum sine wave continuous average power output per channel (With both channel driving 8Ω loads over a power band from 20Hz to 20kHz, THD - no more than 0.1%)
480W minimum sine wave continuous average power output per channel (With both channel driving 4Ω loads over a power band from 20Hz to 20kHz, THD - no more than 0.15%)
320W continuous average sine wave power into 8Ω (With less than 0.1% THD, at 1kHz, both channels, 1 driven)
Power Output (Monaural):
600W minimum sine wave continuous average power output (Monaural driving 16Ω loads over a power band froth 20Hz to 20kHz, THD - no more than 0.1%
960W minimum sine wave continuous average power output (Monaural driving 8Ω loads over a power band from 20Hz to 20kHz, THD - no more than 0.15%
1100W continuous average sine wave power into 8Ω (With less than 0.1% THD at 1kHz)
Power Output (Transformer Output):
300W minimum sine wave continuous average power output with either a 25 or 70V distribution system over a power band from 30Hz to 15kHz
The maximum THD at any power level 250mW to 300W shall be not more than 0.5%
Output Impedance:
Designed for load impedances of 2.1Ω / 25V or 16Ω / 70V
Frequency Response:
20Hz to 20kHz, +0 -0.5dB
Total Harmonic Distortion:
Less than 0.01% (At 300W, 8Ω at 1kHz)
Less than 0.1% (At 300W, 8Ω at 20Hz to 20kHz)
Less than 0.005% (At 960W, 8Ω at 1kHz, monaural)
Intermodulation Distortion:
0.05% (Using frequencies of 60Hz and 7kHz, mixed in a ratio of 4:1, at power output of 100W into 8Ω)
Input Sensitivity:
+4dB (1.23V), ±0.5dB (Produces an output of 300W into 8Ω)
Input Attenuator set for maximum level
Input Impedance:
10kΩ (Unbalanced)
[Damping Factor]
At 8Ω:
Greater than 260 (At any frequency from 20Hz to 1kHz)
Greater than 95 (At any frequency from 20Hz to 20kHz)
At 16Ω:
Greater than 160 (A t any frequency from 20Hz to 1kHz)
Greater than 50 (A t any frequency from 20Hz to 20kHz)
[Impedance Actual Output]
At 8Ω:
Less than 0.03Ω (At any frequency from 20Hz to 1kHz)
Less than 0.08Ω (At any frequency from 20Hz to 20kHz)
At 16Ω:
Less than 0.1Ω (At any frequency from 20Hz to 1kHz)
Less than 0.3Ω (At any frequency from 20Hz to 20kHz)
Hum and Noise:
109dB below rated output (20Hz to 20kHz)
114dB below rated output (IHF-A, weighted)
Channel Separation:
At least 90dB at 1kHz
At least 75dB at 20kHz
Overall Protection:
AC line protected by circuit breaker
Protection LED flash when heat sink temperature reaches more than 105°C
Protection LED come on when the relay activated by the DC current flow to output or by short circuit
Finish:
Black painting
Power Supply:
AC 100V, 50 / 60Hz
Power Consumption:
850W (Max.)
Dimensions (W x H x D):
483 x 222 x 475mm
Weight:
28kg

Buy this model

You can make a purchase request for this model. Our funds often hold several copies of each model. We are ready to consider any request and offer you our price.

Send request

SEND REQUEST