Damping factor: | 30 (8Ω, 1kHz) |
Frequency response: | RIAA equalization curve, ±0.3dB)
100Hz to 10kHz, +0 -3dB (MIC)
10Hz to 50kHz, +0 -3dB (Tuner, AUX, Tape1, 2) |
Total harmonic distortion: | Less than 0.3% at rated output (8Ω)
Less than 0.7% at rated output (4Ω)
Less than 0.2% 1W output |
I.M. distortion (60Hz: 7kHz = 4: 1): | Less than 0.5% at rated output
Less than 0.2% 1W output |
Input sensitivity / impedance: | 2.5mV (-50dB) / 50kΩ (Phono)
2mV (-51.7dB) / 10kΩ (MIC)
150mV (-14.5dB) / 50kΩ (Tuner, AUX, Tape1, 2) |
Maximum input capability (At 1kHz, 0.5% distortion): | 240mV (Phono) |
S / N (Weighting network, input level): | 80dB (Phono, A, 2.5mV)
95dB (Tuner, AUX, Tape1, 2, A, 150mV) |
Output level / impedance: | 150mV (-14.5dB) / 10kΩ (REC Out1, 2)
Low and high impedance (Headphones) |
Speaker: | 8 to 16Ω (Canadian model)
4 to 16Ω (AEP, U.K., E models) |
[Tone controls] | Bass: ±9dB at 100Hz
Treble: ±9dB at 10kHz
Loudness (Att. 30dB):
+9dB at 100Hz
+4dB at 10kHz |
System: | Direct output coupling, pure-complementary symmetry power amplifier circuit (SEPP OTL) |
AC outlets (Japan and Canadian model): | 1 x Switched (100W)
2 x Unswitched (Total 200W) |
Power requirements: | AC 100V, 50 / 60Hz (Japan model)
AC 120V, 60Hz (Canadian model)
AC 220 (Or AC 120 or 240V adjustable by Sony personnel), 50Hz (AEP model)
AC 240V, 50Hz (U.K. model)
AC 120 / 220 or 240V adjustable, 50 / 60Hz (E model) |
Power consumption: | 75W (Japan model)
125W (Canadian model)
250W (AEP, E models)
325W (U.K. model) |